About Hvidberg

Description

12 Statistics About Suzuki Ignis Key To Refresh Your Eyes At The Cooler Water Cooler
How to Unstick a Suzuki Ignis Key

Suzuki's fanciful, inexpensive city car is getting a midlife refresh. It's not a hot hatch, but it's able to handle roads in rural and urban areas with ease. Its tight turning circle makes driving in towns an easy task.

The new model comes with clever driver assistance and safety technology - including lane departure warning and a drowsiness detection alarm that's a welcome addition on long drives.

Steering Lock

The steering lock is a security feature which prevents your Ignis being taken when it's in gear. It's a helpful safety feature but it can be a hassle when you're in a hurry and you're unable to unlock your steering wheel. There are a few simple actions you can take to solve the issue.

First, make sure the ignition switch is set to "on". Then, if it is, then try to turn the key in the direction you were turning it before the wheel locked up. It's a bit difficult, but in most cases it's enough to unlock the wheels.

If the wheel does not unlock after spraying canned air into the ignition cylinder, you may lubricate the cylinder. Wear eye protection to avoid getting the canned air in your eyes. Liquid graphite is also a good option to help lubricate the cylinder.

If none of these strategies work, you'll need to replace the ignition lock assembly. This part can be found at any auto parts store. Just ensure you buy the exact replacement, and then compare it with your old one before you attempt to install it. Also, make sure to take off the cover over the ignition to be able to see and access the ignition.

Worn

The steering lock can cause the ignition switch to be stuck. This is a safety feature that prevents your Ignis from slipping away when the engine is running. If this happens, turning the steering wheel will release it.

As time passes, the Ignis keys can get worn out and become harder to turn. It might not occur as frequently as a bad switch, but it does happen. If this is the case, you must replace your key.


It is also important to find out if there is something that is blocking your Ignis key from getting into the ignition cylinder. There could be debris or dirt that can get stuck inside the ignition cylinder, preventing it from turning.

You could also try an ounce of lubricant to determine whether it will help. There are a variety of lubricant available to purchase, so check out your garage or visit an auto parts store in your area to find one that is able to work.

Another option is to utilize the silicon "glow in the dark" key cover. These covers absorb light energy and release it when in dark or hazy conditions. They will also help to protect your fob or key from wear and wear and tear. These are available for many Suzuki models and can be bought either online or at an Suzuki dealership near you.

Bent

Over time and with repeated use a key can get bent. This could cause the teeth of the key not to be in contact with the lock cylinder in the same way and stop the key from turning the ignition. If this happens the key will have to be replaced. It is a good plan to duplicate the spare key and keep it in a secure location.

suzuki swift key fob could be that the ignition cylinder itself can wear out. If the internal lock pins are stuck or jammed together the cylinder may be unable to allow a key from going through or out of the cylinder. This can be fixed by replacing the cylinder however, it is recommended to replace the cylinder before the key is stuck in the ignition.

If your Ignis key is stuck despite trying the simple fixes it's time to try lubricating the cylinder. Graphite powder or liquid graphite may aid in allowing the lock pins to move more freely, and also free your key. You can purchase this in a lot of auto parts stores. Make sure that you put your Ignis into park before applying the grease. Don't try manipulating the Ignis with your hands to unbind it. This could result in more serious problems.

Broken

If you've tried a variety of methods to make a key unstick, but it's still refusing to move, the final option is to apply fluid to get it moving. You can purchase this at your local auto parts store and apply it to the inside of the ignition lock cylinder using a cotton ball or rag. Try again. Move the key forwards and backwards gently to spread out the lubricant. If you can massage it forward, do it but be careful not to push too hard or you could break it off inside the cylinder.

It's also possible that the internal circuitry of the key will become unresponsive as time passes. This isn't nearly as common and usually means that you'll have to have the key duplicated to make room for another one.

The case of your Suzuki keyfob can also become damaged or worn. This is more common when you are using a cheap key fob replica that has a rubber or plastic shell. The Key Crew may be capable of transferring the internal circuitry of your old keyfob into a replacement case depending on the circumstance. This will help you save the expense of purchasing a new keyfob. When we call to set up your service, we'll let you know if this is a viable alternative.