About Mouritzen

Description

20 Fun Informational Facts About Double Glazed Window Repair
Double Glazed Window Repair

It's worth looking over the warranty included with most double-glazed windows. It usually covers any problems with window hardware, such as hinges and locking mechanisms within the first 10 years.

A crack in the seal is typically the cause of mist between your glass windows. This needs to be fixed immediately to avoid mould or damp forming within your home.

Condensation Between the Windows

If condensation appears between your windows, it is an indication that the seal holding in the gases that insulate the window has failed. This is a serious issue that must be dealt with promptly, especially in winter, when humidity levels are at their highest. It could cause damage around the sills and sealant, and even mould or mildew.

Double-glazed windows should not have condensation between the panes. This can be caused by high humidity or a very cold snap. Fortunately, this issue is fixable without replacing the entire window. A professional can drill tiny holes into the window and then spray a special cleaning solution inside. RepairMyWindowsAndDoors is then drained from the window. Additionally, an anti-fogger can be installed to prevent the accumulation of moisture from happening again.

Condensation may also occur between the windows as a result of air leakage, or other factors outside the window. If this is the case, it will likely take longer for the moisture to accumulate in the window, as the air has to be sufficiently warm for the water molecules to evaporate. In these instances it might be more beneficial to replace the double-glazed windows rather than trying to repair the seals on the existing units.

A double-glazed glass window is comprised of two or more pieces of tempered insulated glass that are held together by a framework made of metal. The space between the windows is filled with an insulating gas such as Krypton or argon, and then sealed. The seal prevents the insulating gases from leaving and also prevents air and moisture from entering the gap.

As windows age, seals may get damaged and allow moisture to escape between the glass panes. It is important to recognise when the seals are leaking, as it means that the double glazing isn't functioning as efficiently as it did in the past. This can result in poor energy efficiency, higher heating bills, damaged properties and the risk of condensation between the windows.

Mist

If you have condensation on the outside of your windows, this is normal and indicates that your double glazing is in good working order and retaining the heat inside your home. The condensation happens because the outside air is hotter than the glass, and then reaches the dew point of the window prior to the air inside. Double glazing of top quality is an excellent method to accomplish this.

If the condensation is on the inside of your window then it could be a sign of a problem with the ventilation in your home. This is because the extra moisture has nowhere to go and ends up on your windows as well as in carpets, on furniture and in other places in your home. Getting this checked out by an expert and ensuring that there plenty of fresh air flowing through your home will help avoid it in the future.

Another reason you could have mist on your double glazed window is that the seal between the two panes has worn down. This can be caused by wear and tear or by using chemical cleaning solutions. If this is the case the best solution is to repair the windows in the shortest time possible.

Repairing your windows professionally will ensure that they remain clear of fog free of condensation and free of misting. It is also a lot cheaper than replacing them completely and will help you save money on your energy bills.

A FENSA certified window installer can offer a price for the repair or replacement of your double-glazed windows. If your existing windows are quite old and have been used for a long time you may want to consider upgrading them to A-rated energy efficient ones.

It is a very good idea to keep copies of any warranties or agreements with your window fitting company. It will be helpful if you experience any problems with your windows. You can contact your window fitters and work out the problem. This is a better choice than ignoring the problem, which could lead to additional problems in your home.

The difficulty of opening or closing the door

It's not just annoying when double-glazed windows are difficult to open or close. They could also lead to higher energy bills because of heat loss and draughts. It can also be a security issue especially if the locks aren't working properly. It is vital to fix any problems with double glazed windows and doors when you spot them.

If you have attempted to open your window using one of the easiest methods, like using a screwdriver or tapping on the frame using a solid object, the issue could be more serious. The window may have shifted and needs to be re-set or there may be a gap between glass and frames. In either case, you should call in an experienced double glazing repair expert to make sure that the proper repairs are made and to avoid any future issues.


It isn't common to find UPVC window handles and lock mechanisms to become stuck or unusable, especially when they are old and worn. This is caused by the accumulation of dirt or grease within the handle and can often be resolved by cleaning it using a uPVC cleaner. If this doesn't help, you could try gently tapping the uPVC frame with a hard object like a screwdriver, being careful not to scratch the handle or the window handle mechanism.

If this does not solve the problem then the window will have to be replaced since the hinges may not be in the correct position or the locking mechanism could have been damaged. In this situation, contact a specialist UPVC window repair expert.

David The Window Wizard specialises in all technical aspects of double glazed window and door repair including fixing a jammed or shut double glazing window. He has vast experience the conversion of old window mechanisms into modern ones. This often can save you the cost of replacing the entire window. Contact us today for more information or a no-cost quote.

Warping

Double-glazed windows are typically an excellent option to save energy at home. They consist of two separate panes, with a spacer gas or air between the panes. This creates an airtight seal that keeps cold air out and warm air in. However, over time, these windows can become damaged or broken and require repair. Most of these repairs can be done without the need to replace the entire window.

One of the most common issues double glazed windows experience is warping. This occurs when the windows start to bow, bend or twist, which can impact the strength of the window as well as its ability to insulate. Double-glazed windows should be installed correctly and maintained regularly to avoid this problem.

Contact a specialist as soon as you realize that your double-glazed windows are sagging. This will help prevent the situation from getting worse. They can inspect your windows and determine the reason for the warping. They will use special tools to fix your issue and make sure that your windows are fully sealed again.

Water vapour is a cause of this issue, since it can build up between the windows over time. This could be due to a variety of factors, such as the weather conditions as well as humidity levels and temperature fluctuations. To remedy this the expert will make tiny holes in the window to let out the moisture. The specialist will apply a cleaner on the glass to cleanse it and then apply an adhesive.

If your windows aren't able to be shut or opened, it could be due to a broken mechanism or hinges. Before calling an expert to resolve the issue, it's worthwhile to grease these parts. This can usually fix the issue and decrease the need for replacements. If your windows are old or don't provide the insulation you require It may be better to replace them.