About Lund Hansson

Description

The 10 Most Dismal Saab 93 Key Fob Failures Of All Time Could Have Been Prevented
How to Replace a Saab 9-3 Key

The Saab 9-3 has a great attraction for drivers. It has excellent visibility and a powerful performance engine. It also has a top safety rating.

It is nevertheless important to make sure that you have at minimum two keys that work for your vehicle. If you lose only one key, it could be expensive to replace it with a new one.

How to Replace the Ignition Key in a Saab9-3

You'll must replace your car key in the event that it isn't turning. This guide will explain how to replace the ignition key on the Saab 9-3. You will need to replace the key, purchase a new reprogrammable cell, and buy a new case for your key-fob.

In contrast to older models, the majority of modern Saab vehicles use a transponder on the key-fob rather than a physical metal key to unlock and start the car. The reprogrammable batteries inside the key-fob eventually wear out, and they aren't able to hold any charge. This is especially true if you use the same key for the lock you have.

A professional locksmith can replace the battery quite easily. You can also do it yourself if you have the necessary tools and a little bit of patience. The first step is separating the key-fob. Insert a flathead into the slot that is in the middle of your case. The plastic is very thin and easily damaged.

Once the case is opened, you can create the new key by combining the lower part of old key with the transponder and banana. This will ensure that the new key is linked to the CIM properly, which can be the difference in replacing the sole key for your Saab 9-3.

How do you replace the ignition Key on the Saab 900

If you don't have two keys, you'll need to remove the steering wheel and dashboard for access to the ignition. Start by disconnecting the negative battery cable. Once the battery is disconnected, you can take off the dashboard and trim pieces that surround the steering wheel. Once the dash is removed, you can insert a screwdriver into the opening on the back of the ignition switch and take it out.

The ignition cylinder has an ignition lock that can stop the car from starting if a key isn't inside it. If the ignition switch on your 900 doesn't work properly, check to see if the key is in the lock or in the barrel of ignition. It's also a good idea to rotate your keys on a regular basis and keep them clean so that one doesn't become bent.

Saab cars differ from other vehicles because they don't have traditional keys made of metal. The car instead recognizes the electrical signals that come from the key fob by using a special microchip in it.


If you have lost your only working key fob the dealer will charge the highest dollar for replacing your computer module (known as the CIM). However, we can reprogram your existing computer EEPROM and prepare it to accept new keys without replacing it. This will save you up to 50% of the price the dealer charges! This is the SAAB KEY PROGRAM. Find out more information about it here!

How to Replace the Ignition Key on a Saab 9-5

The metal portion of the classic Saab keys is simple to copy and does not pose a serious threat to theft of vehicles. The real security is the electronic component inside the key-fob. It contains a chip that recognizes your car when it is inserted into the ignition switch.

saab key fob programming has relied on the technology of this anti-theft system for more than a decade. It's not as secure as an actual lock on the door but it makes the theft of your car much more difficult. This is the reason why every Saab owner should always have an extra key available.

Most new Saabs come with two keys in the factory, however you can buy more keys from an authorized dealer using a handheld computer known as a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is the NG 9-3 cars, which are equipped with newer, more modern features that require a different key-fob and work through a different process.

The dealer will replace the CIM or TWICE module in these vehicles if all keys have been lost, and charge you a premium for this. We can reprogram your computer's EEPROM to accept new keys without replacing expensive modules.

How to replace the ignition Key on the Saab XC90

If your SAAB 9-3 key fob is having problems turning the lock barrel It could be the time to replace it. The process is simple and you don't have to visit a dealership. You can do it at home using a few simple tools.

It is first necessary to prepare the keys for your new car. Before you start, be sure that the anti-theft feature is disabled by placing blocks on your rear wheels, and then adjusting the handbrake. Next, insert the key into the ignition and switch it to the on position that activates the accessories but it does not start the engine. Repeat this five times, then leave the key in the on position.

The next step is to find a new case for your old key fob. You can find them at any auto parts store and they're usually quite affordable. Depending on the model, you can even get them without any electronics.

To open the case simply push the screwdriver with a flathead into the slot in the middle. After you have split the case, you will have access to all of the internal electronics. To remove the electronics use a small screwdriver, and try to pry them out with a gentle force.