About Kock MacKinnon

Description

7 Small Changes That Will Make A Big Difference With Your Upvc Replacement Door Handles
UPVC Replacement Door Handles

The handles on your doors are worn out with time and require to be replaced. It is crucial to match the dimensions of the handles that were previously used when replacing them.

The top screw's position the lever, and the keyhole dimensions are the three measurements you have to verify. Check the size guide for assistance with this.

Inline Lever/Lever

A lever handle or lever is a modern door handle that is designed to fit new or replacement doors. This type door handle is available in a wide range of designs and finishes. A number of manufacturers offer this type of handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/Composite door handles are made of robust materials and are perfect for multi-point lock doors that require a strong design. The handles are inline and work off the same spindle and screw fixings so they can be easily fitted to new or existing uPVC/Composite doors.

The sprung lever design allows the handle to be set and angled to ensure a comfortable experience and is suitable for all users. The handle has been tested to 200 000 cycles. This helps to ensure that the quality of finish and performance will last for a long time. The sprung lever is adjustable to accommodate a wide range of locks. This is useful for doors with narrower openings where the cylinder is situated further back from the door. A lever that is shorter is a good choice for doors where the latch could be activated by the thumb turn on the inside.

Lever Pad

A Lever Pad door handle made of upvc operates differently from lever-type handles that are found on the majority of doors. These handle types are either operated by a single spindle or by two spindles inline or offset. They are generally used on UPVC double-glazed doors and are available in a variety of variations and styles.

The handles have been tested to a minimum of 200k cycles and are available in several finishes, including White and Silver, as well as Chrome & Gold. The finish is BS EN 1670 Grade 5 and is resistant to rust. This gives the handle a high performance and durability to serve its intended purpose.

All of the UPVC lever pad styles for handles come with a spindle and screws, allowing them to be installed on an existing or new uPVC door. The backplate fixing centres of 211mm allow for a wider size of handle which can often be a benefit when replacing a faulty or worn multi point door lock mechanism. The handle levers come with a spring, which solves the problem of door handles that sag out of the horizontal position when not being used.

It is important to ensure that the PZ dimensions of both the multipoint lock as well as the uPVC doors when selecting the replacement UPVC spindle and handle. This measurement can also be referred to as 'handle centres' or cylinder centres'. It is important to match the right handles.

Once you have the correct PZ size you will then have to ensure that the handle lever pads and push pads are a suitable shape for the American with Disabilities Act (ADA) approved handles you need for your doors. These are typically rectangular or round in shape with an internal lever as well as an external push pad.

The majority of the UPVC Lever Pads we offer are sprung. This means that they return to a horizontal position after not being used instead of hanging and possibly securing to the frame. This stops draughts and cold air from entering a home. You will also find that the majority of UPVC handle lever pad style handles are swivel, allowing you to install them on either side of the door.

Euro Cylinder

Cylinder locks are found on uPVC and other kinds of doors. They operate by using a key that unlock a cylinder case that will reveal pins that can be aligned with those in the lock body, permitting them to turn an revolving cam, opening the door. Euro Cylinders can be fitted with up to six pins with internal and external doors usually requiring different levels of security.

The choice of cylinder is essential. It depends on the type of use your doors and handles will receive. Doors that are external, for instance are required to be fitted with cylinders with greater security and internal doors can be secured with a standard cylinder. Additionally, certain cylinders come with additional features which can enhance security further, such as anti-drill or anti-bump features.

To ensure that the euro cylinder is the correct size for your door, it should be measured accurately. The cylinder must be measured from the screw hole at the center to the ends of the cylinder. This includes the thumb turn if there is one. It is recommended to do this with the lock in place however if this is not possible, you can remove it to take measurements. It is essential to avoid having a extension of the cylinder beyond the handle or escutcheon. This could make it vulnerable to snapping lock attacks.


Most newer cylinders have been designed with bump and anti-drill features built into their design. These are designed to reduce the chances of an attack by forcing the cylinder to rotate in an opposite direction. This can to deflect an attack and protect your door.

There are cylinders that have been constructed to resist snapping. This is a common attack on cylinders. A special tool is used to break the break line of the lock, and then the front of the cylinder is snapped off. This is faster and easier to achieve than opening the door with a multipoint lock and leaves little evidence of a burglary, which can hinder the insurance claim.

Spring Cassette

The spring cassette is situated within the base plate of your door handle. It offers a spring-loaded solution to bring your multipoint lock handles to their normal position after usage. The handles were previously equipped with no spring and would drop when the locking mechanism was removed. Adding this simple component is among the most effective ways to fix this and it is also a great way to prevent your upvc doors from getting stuck in either closed or open position, as these are not always easy to manually close by hand.

These spring cassettes were created to be used with a sprung multipoint locks. They will not fit unsprung handles and you'll have to cut a hole into your backplate for them to fit. (Please look at the image for a detailed diagram). Repair My Windows And Doors are a replacement to damaged or missing cassettes in the backplate of uPVC door handles. They are sold as one unit. They feature a square cut out that accommodates an 8mm shaft.

These spring cassettes are an excellent value-for-money solution to the issue of your door handles sagging. These spring cassettes are easy to install and will extend the life of your uPVC door. For more information on our wide range of uPVC accessories and spares, please feel free to get in contact with our team. We are always available to offer professional advice and assistance you.