About MacLeod

Description

How To Save Money On Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Is your uPVC door or window mechanism broken? Perhaps the window or door handles aren't able to connect properly or are difficult to use.

It is crucial that the double glazed doors function smoothly, or else you'll lose energy and increase the likelihood of burglary. Owen the Locksmith can fix your door lock at reasonable costs.

Snapped Key

It can be quite frustrating when a key snaps into the lock. It could also be a security problem, as it may leave you vulnerable to an intruder if the door is not locked. There are fortunately quick fixes you can use to solve the problem and get your door functioning properly again.

Carshalton double glazing repair . If you panic and start playing around with your keys, you might just end up pushing the damaged piece of the key deeper into the lock, making the situation much worse.

Next spray WD-40 or a different penetrating oil into the lock to help the broken piece to slide out more easily. You can also use a screwdriver to break up any pieces that are stuck. If you're lucky enough to have a little bit of the key visible, you can use a paperclip or some other thin metal object to grab it and pull it out. Both methods work well, but be very careful not to push the broken piece of the key further into the keyway.

Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades can also work well for this. If you do not have any of these handy, you can use needle-nose pliers to bend them and create hooks. Additionally, you can use a pair tweezers to grab and pull out the remaining pieces of broken keys.

If you are unable remove the broken piece of key then you can use a lock deicer. It's available at most hardware stores and is used to freeze any moisture present in the lock.

If none of these tricks appear to be working then it's probably the time to contact locksmith. The experts at Fitlocks can quickly fix issues such as broken handles and broken keys with uPVC locks and door mechanisms. They can also reconfigure double glazing door mechanisms to ensure that they are more easy to operate. You can request repairs to your double-glazing online or call us to discuss your needs.

Broken Cylinder


A broken cylinder can pose a major security risk. A professional locksmith can easily fix the cylinder. A locksmith will have to tap the cylinder to fix it. This can be done with a hammer, or any other tool. However, the best method is to make use of a wire or a long match. Position the match or the wire end near the keyway. After this, the locksmith will hit the lock to break it open. This is much better than using a hammer that can harm the lock.

Overheating is the main reason for cylinder heads to crack. This can happen when the cylinder block as well as the cylinder head are made from different metals, including cast iron and aluminum. Different metals can heat up and cool off at different rates. This can cause localised hotspots to expand more quickly than the rest.

Another reason that could cause cracks in the cylinder is corrosion. If the cylinder head as well as the block of the cylinder are not properly maintained, this can cause corrosion or rust and cause them to expand at a higher rate than they should. As time passes, this may also cause cracks.

If your uPVC window or door lock is brittle and requires a lot more pressure to turn, it could be due to a variety of causes. A malfunctioning locking mechanism, misalignment or an old handle are the most common reasons for this issue.

Fortunately, this is an easy and inexpensive fix for most homeowners with double glazing. A professional locksmith should be able to solve the issue within an hour of arriving at your property. Depending on your needs they can change the locking mechanism, change the window handles, and change the gearboxes. A locksmith with experience can always advise you on the most cost-effective solutions for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders that offer an additional security layer from burglars. It is a small cost to pay for the peace-of-mind that comes from knowing that your uPVC door is secure.

Broken Handle

Window handle locks have complex mechanisms that deteriorate with age and use, so it's no surprise they occasionally break. If yours fails, it can be difficult to identify the cause of the issue. Make sure you fix it correctly.

The issue could be with the internal locking mechanism or the latch, fixing the broken handle can improve your uPVC double glazing door's security and allow you stop drafts. Incorrectly repairing or replacing your handle can be very expensive and can cause damage to the door's frame and lock It is therefore worth taking some time to do it right.

Screwdriver Open the window, loosen the screw holding the handle. This should be located on the inside face of the back plate, which is usually hidden by an attractive cover for the screw for aesthetic reasons. Be sure not to damage any of the internal parts within the handle, for example the plates or levers that are on the opposite side of the spindle. Keep them in the same arrangement to make it simpler to replace them in the event of a need.

Then, with a second screwdriver loosen the screw that connects the handle to the spindle in the back. Once the screw is loose, take the handle off and remove the broken spindle. Replace it with a new spindle, ensuring it's the same length (you can buy them on the internet or in hardware stores). Securely screw it in place. Do not tighten the screw too much as this could harm the handle as well as the window frame.

Ensure the new handle is correctly installed Close the window and test the handle. It is likely that it will operate smoothly and you'll be able open your window again.

Make sure to check that your uPVC window is closing properly while you're working with the handle. If they're not closing properly, you may experience draughts or damp in your home. It could also affect the energy efficiency of your home. A local window company, such as Core Sash Windows, will be able to adjust the hinges on your window frames so they can shut properly.

Broken Spindle

It is often the case that the spindle inside a handle breaks rather than the handle itself. This is particularly typical in uPVC tilt and turn windows. These windows require a handle to operate an locking device within the frame of the window. The handle is attached to a rod in the centre that in turn activates cams that resemble mushrooms, which secure the frame of the window. If the dead latch mechanism fails to open when the handle is turned, it is likely that the spindle is broken and this could be a very frustrating issue.

There are solutions to this problem. A good locksmith can quickly and effectively fix this problem. A good locksmith can disassemble the window's handle using a tool to take out the wheel from the area that houses the spindle. This is done without damage to the handle or window frame.

Once the wheel is removed, the technician will examine the spindle to determine what caused it to break. This involves disassembling the spindle, and then examining each component part, noting any damage or excessive wear. This procedure is usually done in a clean environment by highly skilled technicians.

Next, clean the damaged spindle. This will help remove any dirt or debris which may be obstructing it from operating normally. Following this the spindle could be repaired or replaced. If the technician is replacing the spindle, he can use a dowel that is the same size to the original. Then, he will drill matching holes into both pieces. This will ensure that the spindle is perfectly matched with the handle.

If the damaged spindle can't be repaired, it could require replacement completely. Home centers offer generic replacements but If the style of your window is unique then you will need to speak with a woodworker or cabinet maker who can make the exact component for you. After the spindle is installed, it is attached to the handle. The screw holes on the handle with the screws that are already in the frame. Once the new handle is in place, you'll be able to operate your uPVC window.