About Bender

Description

Ghost 2 Immobiliser Installation: A Simple Definition
Autowatch Ghost II Immobiliser Installation

Ghost immobilisers represent the latest in vehicle security. They are groundbreaking in the way they protect your car from key-cloning, hacking & even wheel jacking.

The system requires the correct PIN code in order to start your car. This is done by pressing the buttons on your dashboard or steering wheel.

TASSA Approved

The new TASSA verified Ghost-II CAN immobiliser from Autowatch is a groundbreaking device created to combat recent car criminality trends, such as key cloning and hacking. This smart system can connect directly to your vehicle's onboard CAN data network, preventing your vehicle from being driven or started without the correct code. The system is undetectable, and does not use radio frequencies or key fobs. Instead, it lets you create a unique sequence of PINs by using buttons on your dashboard or steering wheel, which you are able to modify at any point. You can design the PIN as long as 20 presses long to ensure maximum security and an emergency code that is secure provided too.

The system works by communicating with the vehicles CAN data network to identify when a specific PIN has been entered, this then sends a signal to the vehicle which disables the ignition and engine and shuts down crucial components like the starter motor and the fuel pump. The system has a 'valet' mode that lets you deactivate it and prevent valets or staff from driving your car without the proper key.

In contrast to traditional immobiliser relays which can be disabled with readily available diagnostic tools for professionals The Ghost device relies on the onboard data network to communicate with the ECU and cannot be altered with. It's a sealed unit, so it is impossible to access the circuits, making it virtually impossible for thieves to hear the tell-tale clicking sound that traditional immobiliser relays emit.

This technology is not vulnerable to jamming devices used by high-tech thieves. Furthermore, since it is based on the CAN data network it's also not detectable by other diagnostic tools. This means it's an ideal anti-theft solution for every modern vehicle.

Once you've booked your TASSA approved ghost 2 immobiliser installation, we'll set up a date and time to visit your place of business or home to complete the installation. We will walk you through the full demonstration with you, and then give you an owner's manual, emergency cards, two Autowatch window stickers and an installation certification.

Insurance Approved

The Ghost is a security device installed aftermarket to protect against the kinds of thieves interested in stealing vehicles. It works by preventing your engine from starting until a specific sequence of buttons is pressed. This sequence is only recognized by you, therefore if your car is stolen, thieves will not be capable of starting it and will likely leave the vehicle in peace to avoid being caught. Ghost also has a silent mode that will shut down the vehicle when it's not in use. It can be turned off with the press of one button.

The system is fully TASSA (Tracker and Aftermarket security systems association) insurance approved, meaning it is recognized by some insurers as an additional security measure for your vehicle. It can be utilized together with other approved by Thatcham security measures, such as trackers, to prevent your vehicle from being taken. This gives you security.

In addition, the system communicates with your vehicle's ECU via the CAN data circuit. This makes it inaccessible to diagnostics tools and completely silent. The Ghost cannot be bypassed by a thief simply adding an additional key to the vehicle or replacing the ECU. The system will only start your vehicle if you enter the correct pin code. This unique PIN code is only accessible to you & can be changed at any time.

The Ghost is an immobiliser that is able to be fitted to any vehicle without the necessity of additional key fobs or wiring. It is directly connected to the vehicles CAN data network and a personalised PIN code of your preference is programmed in it using existing buttons on the steering wheel and dashboard. This code will prevent the vehicle from being started unless the correct sequence of events has been selected first. In the event that the code is misinterpreted there are emergency codes that can be reset via your mobile phone. In addition there is a simple application available for iOS and Android that eliminates the need to enter your pin every occasion, providing even more hassle free security.


The shrewd

In contrast to the GPS tracker that only aids in locating your car after it's been stolen, an immobiliser system stops the vehicle from being taken in the first place. This is done by preventing the engine from starting until it is able to receive the correct code from the key fob or a smartphone application downloaded to it. This is a great method to stop wheel-jacking and other thefts because the person who is stealing has no choice but to leave the vehicle alone or risk being arrested.

The ghost immobiliser, a small weatherproof device, fits into the wiring harness of your car. It is hidden and connects to the CAN data network. This means that thieves can't identify it or disable it by cutting wires. The system has a service-mode that can be turned on to allow your garage to work on your vehicle without needing to know the password.

After you've had the device fitted to your vehicle it will be able to arm and disarm it from your smartphone via its dedicated application. You can alter the PIN number whenever you wish to ensure that you're the only person who has access to your car. This is helpful if you plan to sell your car in the future since it can increase its potential resale value.

Another benefit of the Ghost immobiliser is that it's discrete and leaves no marks on your internal body of your vehicle, making it an ideal accessory to any vehicle. It's simple to install, works quietly and won't interfere with any other systems in your vehicle.

Many people are placing more importance on the appearance of their cars and a subtle immobiliser can add to the appearance and feel of your car. This can be especially appealing to those who utilize their vehicles to transport valuable items, as it will help to stop potential thieves from pursuing them. A ghost immobiliser will be used in conjunction with other anti-theft device, such as trackers to provide unbeatable security for your vehicle.

Low Maintenance

A Ghost immobiliser works by connecting directly to the CAN data network. It is virtually undetectable since it doesn't have any LED indicators or other key fobs. It also doesn't emit any radio signals and is silent so that thieves won't be able to detect it operating. This device can be hidden in a variety of locations (even beneath the floor mats) and is an excellent option for those who want to secure their vehicle without compromising on aesthetics.

This device prevents your car from starting unless you enter an individual password to you. This is accomplished by pressing a set of buttons located on your dashboard and the steering wheels in a particular sequence. This makes it difficult for thieves to clone or hack into your system, and also prevents them from starting your car.

The Ghost will be alerted to increase your signal and prevent your vehicle from starting until the proper disarming code is entered. The Ghost is unlike other security systems which can be activated with the incorrect code. It will keep preventing your vehicle from starting until you enter the correct passcode.

The Ghost will remain in "service mode' until you activate it by pressing the same set of buttons that you used to arm it (this can be done when you visit your dealer for warranty or maintenance work). This is to stop it from being taken off by people who are not authorized and to ensure it's fully armed whenever it is needed.

It is also possible to transfer your Ghost to a different vehicle if you change vehicles in the lifetime of ownership, provided that the new vehicle is compatible with. bmw x6 ghost installer includes QR finger prints that are linked to the International Security Register. This means that if you experience your Ghost stolen for parts, it could be traced to you and your car. This will deter criminals from stealing vehicles fitted with Ghost as they are aware that they are protected and are less likely to be caught and convicted.