About Thybo

Description

25 Surprising Facts About Upvc Replacement Door Handles
UPVC Replacement Door Handles

The handles on your doors get worn out over time and will need to be replaced. It is important to match the dimensions of the old handles when replacing them.

The three measurements you need to examine are the top screw position, lever and key hole dimensions. Refer to the size guide for assistance with this.

Inline Lever/Lever

A lever handle is a modern door handle designed to suit new or replacement doors. This kind of door handle is available in a wide range of styles & finishes. A variety of manufacturers provide this handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The handles made of uPVC/Composite are made from robust materials, and are perfect for multi-point lock doors that need a heavy-duty design. The handles are inline and work with the same spindle as well as screw fixings so they can be easily incorporated into new or existing uPVC/Composite doors.

The design of the sprung lever allows the handle to be set and angled to provide a comfortable grip and is suitable for all users. The handle has been tested for endurance up to 200 000 cycles. This ensures that the quality of finish and performance will last for a long time. The sprung lever can also be reduced to accommodate a wider range of locks. This is particularly beneficial for narrower door frames where the cylinder is located further back. A shorter lever is an ideal choice for doors where the latch can be opened by a thumb turn located on the inside.

Lever Pad

A Lever Pad upvc door handle operates differently from lever-type handles found on most doors. These handle types can either use a single spindle (inline) or independently from both sides using two inline or offset spindles (pad). They are typically employed on UPVC doors with double glazing. They are available in a range of finishes & variations.

The handles are available in a variety of finishes, including White Chrome and Gold. The finish is BS EN 1670 Grade 5 and is resistant to corrosion. This provides the handle with a high performance and durability for its intended purpose.

All UPVC levers for handles come with a spindle, screws, and can be fitted on the uPVC door. The backplate fixing centres of 211mm permit a bigger size of handle which can be beneficial when replacing a damaged or worn multi-point door lock mechanism. These handle levers are also spring-loaded, which solves the issue of handles hanging out of the horizontal position when they are not in use.

When selecting the replacement UPVC handle and spindle it is essential to match the dimensions of the PZ of the multipoint lock as well as the uPVC door. This measurement is often known as the 'handle centre' or 'cylinder centres which is a crucial aspect in ensuring that you have the appropriate handles.

After you have determined the correct size of PZ it is important to ensure that the push and lever pads are shaped to fit the American with Disabilities Act compliant handles you require for your door. These are typically rectangular or round in design with an internal lever as well as an external push pad.

The majority of the UPVC Lever Pads that we offer are spring-loaded. This means they return to a horizontal position when they are not in use, rather than hanging and possibly securing to the frame. This helps prevent the draughts and cold air from getting into a house. The majority of UPVC lever pad handles are available in left and right handed versions that allow them to be installed on either side of the doors.

Euro Cylinder

Cylinder locks are usually found on uPVC doors, but can also be found on other types of door. They work by using a key to unlock a cylinder that will reveal pins that can be aligned to those inside the lock body, allowing them to turn an revolving cam, opening the door. Euro Cylinders are available with up to six pins. Doors that are internal and external require different levels of security.


The choice of cylinder you choose is crucial. It depends on the type of use your doors and handles receive. For example, external doors must be secured with a higher security cylinder, while internal doors can be secured with an ordinary cylinder. In addition, some cylinders have extra features that increase security even more, like anti-drill or anti-bump features.

To make sure that the euro cylinder is of the right size for your door, it should be measured correctly. The cylinder needs to be measured from the screw hole in the center to the ends of the cylinder. This includes the thumb turn, in the event that one is present. It is best to do this with the lock in place however, if this is not feasible, you can take it off and take it off to measure. A cylinder that protrudes beyond the handle and escutcheon might be vulnerable to attacks, such as snapping locks, therefore it is crucial that it is not too long.

The design of most newer cylinders comes with anti-drilling as well as bump resistance features. They are designed to decrease the chance of attack by forcing cylinders to turn in a new direction. This can help prevent attacks and ensure your doors are secure.

Certain cylinders are made to withstand snapping. This is a common attack on cylinders. A specific tool is used to break the break line of the lock and then the front of cylinder is snapped off. This is a much faster and simpler method to gain access than using the use of a multipoint locking system. It also leaves no evidence of the break-in which could make it difficult to prove insurance claims.

Spring Cassette

The spring cassette is located inside the base of your door handle backplate, providing a spring solution and returning your multipoint lock handles to their normal position after usage. These handles used to have no spring and would droop when the locking mechanism was disengaged. This simple feature is one of the best methods to correct this and it is also an effective way to keep your upvc doors from getting stuck in the open or closed position, since they are not always easy to close manually.

These spring cassettes are specifically made for use with sprung multipoint locks They will not work with multipoint handles that are not sprung and you must have a bespoke hole cut into your backplate in order for them to fit (please see image for technical diagram). They are a replacement for existing broken or missing cassettes in the backplates of door handles of numerous brands of uPVC doors. They have a square cut out which accommodates an 8mm spindle and they are supplied individually.

These spring cassettes offer an excellent value solution for the problem of door handles that are sagging. They are simple to install and will increase the life span of your uPVC doors. Contact us for more information about our wide range of uPVC accessories and spares. We are always available to offer professional advice and assistance you.