About Bennedsen

Description

10 Kia Picanto Key Fob Replacement Tips All Experts Recommend
How to Replace a Kia Sportage Replacement Key

For a variety of Kia models the key comes with an integrated keyless entry system. The key is usually akin to a remote control and can be changed with a new one from an Kia dealer or locksmith.

Key fobs may stop working due to a number of reasons, such as the battery being dead, worn-out buttons signal interference, or water damage. Here are some helpful tips on how to get your Kia Sportage replacement key back to working.

How do you replace the remote key or the smart key?

Whether your Kia is equipped with an intelligent key, remote key push-to-start keys, or a standard non-transponder key made of metal, the battery in these keys will eventually require replacing. This is especially when the car displays a message indicating that the smart or remote key has a low battery.

This is a relatively easy procedure. To replace the battery in the keyfob take out your mechanical key from the slot at the back of the fob. Then, pry the cover off. A small screw is inside the key fob that holds the battery in place. Remove the old battery by unwinding the screw with the help of a small screwdriver. Then insert the new one and close the hole in the key fob.

Test the key fob by pressing the lock or unlock buttons. It's good in case the doors lock and unlock as expected. You can now utilize the Kia's hands-free lock/unlock feature when your fingers are cold or you need to make errands in Brandon.

Note: Some keys may require to be programmed (transponder chips or smart keys). This requires a programming machine that is available only to the automotive locksmith or dealer. Other keys (non transponder metal keys) do not require programming. If your key has to be reprogrammed, then you must know the key code number printed on the tag of the key code and save it in a safe location.

How to replace a battery

If your Kia key fob is not responding when you press the lock or unlock button on the fob, this is a signal that the battery needs to be replaced. A low battery could cause other issues, such as the check engine light flashing on or the engine not cranking. It is fairly easy to replace key fob batteries with only a few simple tools.

Make sure that you shut off your vehicle and close all doors before you begin. Find the small, metal or plastic piece that is on the bottom of your key fob and move it until a metal key is released. Then, you can insert the key into the handle of the door for the driver to open your car.

To replace the key fob's battery, remove the cover at the rear and use a plastic bar tool to remove the latch holding the black negative battery cable. Remove the old battery and orient the new battery in a way that the "+" positive side is facing you, and the "negative" negative side is facing towards the fob's electrical contacts made of metal. Push the new CR2032 battery straight into position without putting too much force on it to avoid damaging or breaking the contacts on the metal.

After installing the new battery then turn the key fob on and off in the ignition until the door locks up. You can then test your Kia's keys fob once more to ensure it is working correctly.

How do I replace a smart key

You may have either a standard keyfob or a Smart Key depending on the model of Kia Sportage. The difference between the two is that the smart fob has a small mechanical key blade that is hidden inside, while the standard key fob does not. Both types of key fobs have batteries that eventually will need to be replaced. Fortunately, this is an easy task that will take about two minutes.

Make sure you turn off your Kia and stand on a level well-lit and well-lit area before you begin. Also, remember that there are tiny pieces inside the fob which could fall out if you are not cautious.


The first step is to find the small release button that is located on the back of the lower part of the fob. It can be an oval silver button or a rectangular slot. You can open the key fob by pressing the button.

After the key fob has been opened, remove the battery that was in it. The new battery is a CR-2032 that can be purchased online or at your local auto parts store. After you're done, your key fob should permit you to lock the vehicle, unlock it, and then start your vehicle even if it's not running.

How do you replace the mechanical key?

The Kia key fob is an amazing convenience that allows us to lock and unlock our car at the push of an button. Like any device that is used, the Kia key fob can occasionally have problems. Luckily, there are steps to take to resolve these issues and ensure that our key fobs are in good working order for the long term.

A dead or low-quality battery is one of the most common problems. This can cause your device to stop working or operate intermittently. If this is the case you should replace the battery an entirely new battery.

If this does not solve the issue, use a flathead screwdriver standard to wedge the fob's plastic casing open. Be careful not damage any internal components or scratch the plastic. After opening, carefully remove the old battery and replace it with a brand new one.

Close and open the door with the mechanical key. (Every kia fob comes with a spare mechanical key which will fit into the slot). Test the fob to make sure it's working as intended. Contact kia picanto spare key to solve the issue if the fob is still not working. Make sure they make you an emergency key that can work in all the door and trunk cylinders to avoid lockouts in the future.